Publikationen

• 24.10.2024 - Modelling the Elasto-Plastic Material Behavior of Textured Hexagonal Close-Packed Metals
• 20.09.2024 - Reducing the environmental embrittlement effect of TiAl alloys exposed to air at high temperatures by a fine-grained surface structure
• 12.06.2024 - The Lightweight Potential of Anisotropic Plate Lattice Structures
• 15.05.2024 - Lightweight Potential of Anisotropic Plate Lattice Metamaterials
• 29.03.2024 - In Situ Pure Shear Tests on Textured Magnesium AZ31B Sheets
• 22.12.2023 - In Situ Uniaxial Compression of Textured Magnesium AZ31B
• 03.10.2023 - Deformation behaviour of a cast Fe–19Al–5Cr-0.04Zr alloy at room and intermediate temperatures
• 21.04.2023 - Forschungsprojekt Leichtbau (FPL)
• 01.12.2022 - Structural characterization of layers fabricated by non-vacuum electron beam cladding of Ni-Cr-Si-B self-fluxing alloy with additions of niobium and boron
• 01.07.2022 - Influence of a fine-grained surface structure on the tensile behaviour of a beta stabilised intermetallic γ-TiAl-based alloy
• 21.06.2022 - Low Cycle Fatigue Behaviour of Hot-Bent Basal Textured AZ31B Wrought Magnesium Alloy
• 31.05.2021 - Low-Cycle Fatigue Behavior of Hot-Bent Basal Textured AZ31B Wrought Magnesium Alloy
• 01.10.2020 - The influence of near service environmental conditions on the corrosion and LCF behaviour of a beta-stabilized γ-TiAl alloy
• 09.09.2019 - Discontinuous and inhomogeneous strain distributions under monotonic and cyclic loading in textured wrought magnesium alloys
• 01.07.2019 - In situ X-ray tomography investigation of the crack formation in an intermetallic beta-stabilized TiAl-alloy during a stepwise tensile loading
• 15.06.2019 - Microstructural investigation of twin-roll cast magnesium AZ31B subjected to a single monotonic compressive stress
• 02.03.2019 - Structure and Properties of Functional Self-Fluxing Nickel-Containing Coatings Obtained by Non-Vacuum Electron-Beam Cladding
• 28.02.2019 - Twinning in compression-strained AZ31B magnesium alloy
• 01.02.2019 - Ermittlung von anwendungsnahen Materialkennwerten am Beispiel einer TiAl-Legierung
• 01.12.2018 - Concept of the highly strained volume for fatigue modeling of wrought magnesium alloys
• 24.07.2018 - Localized Fatigue Description Method for Strongly Inhomogeneous Strain Distributions in Wrought Magnesium Alloy
• 10.11.2017 - Influence of strongly inhomogeneous strain fields on the fatigue behavior of wrought magnesium alloys
• 01.05.2017 - The fatigue life of notched magnesium sheet metals with emphasis on the effect of bands of twinned grains
• 01.03.2017 - Inhomogene Beanspruchungszustände in Magnesiumfeinblechen und Beschreibung des HCF-Verhaltens mit dem Konzept des hochbeanspruchten Volumens
• 01.11.2015 - A phenomenological stress–strain model for wrought magnesium alloys under elastoplastic strain-controlled variable amplitude loading
• 28.05.2015 - Deformation Behavior and Fatigue Analysis of Magnesium Wrought Alloys under Variable Amplitude Loading
• 05.04.2015 - Uniaxial cyclic deformation and fatigue behavior of AM50 magnesium alloy sheet metals under symmetric and asymmetric loadings
• 20.02.2015 - Energy based fatigue model for magnesium wrought alloys
• 01.03.2014 - Numerical Fatigue Analysis for Twin Roll Cast Magnesium Sheet Metal Structures
• 10.01.2014 - Quasi-static and fatigue behavior of extruded ME21 and twin roll cast AZ31 magnesium sheet metals
• 12.09.2013 - An Experimental Study on Low-Cycle Fatigue Properties and Cyclic Deformation on Sheet Metals of the Magnesium Wrought Alloys ME21, AZ31 and AM50
• 03.04.2012 - Mechanical behavior of a cellular composite under quasi-static, static, and cyclic compression loading
• 03.04.2012 - Mechanical Behavior of a Cellular Composite under Quasi-Static, Static and Cyclic Compression Loading
• 01.04.2012 - Deformation of microstructurally refined cast Ti46Al8Nb and Ti46Al8Ta
• 01.01.2012 - Microstructure and properties of microstructurally refined cast Ti46Al8Nb and Ti46Al8Ta
• 24.02.2011 - Untersuchung des Steifigkeits- und Festigkeitsverhaltens der Magnesiumknetlegierungen ME21 und AZ31 in Form von Feinblechen
• 01.07.2010 - Low cycle fatigue of Fe3Al-based iron aluminide with and without Cr
• 03.06.2010 - Creep strength of a binary Al62Ti38 alloy
• 01.05.2010 - Nucleation of massive gamma during air cooling of Ti46Al8Ta
• 01.01.2010 - Influence of processing on the microstructure and mechanical behaviour of Mo-Si-B alloys
• 01.01.2010 - High temperature creep behaviour of Al-rich Ti-Al alloys
• 01.11.2009 - Recent Advances in the Development of Mechanically Alloyed Mo Silicide Alloys
• 01.08.2009 - Ductilization of Mo–Si solid solutions manufactured by powder metallurgy
• 09.07.2009 - Metallic materials for structural applications beyond nickel-based superalloys
• 15.06.2009 - Microstructures of Co–Re–Cr, Mo–Si and Mo–Si–B high-temperature alloys
• 15.06.2009 - Creep strength of centrifugally cast Al-rich TiAl alloys
• 01.01.2009 - Microstructures and tensile properties of massively transformed and aged Ti46Al8Nb and Ti46Al8Ta alloys
• 01.01.2009 - Current status of Mo-Si-B suicide alloys for ultra-high temperature applications
• 01.07.2008 - Mechanically alloyed Mo–Si–B alloys with a continuous α-Mo matrix and improved mechanical properties
• 01.02.2008 - Molybdenum alloys for high temperature applications in air
• 15.08.2007 - Assessment of the high temperature deformation behavior of molybdenum silicide alloys
• 15.08.2007 - The influence of silicon on the strength and fracture toughness of molybdenum
• 01.10.2006 - Assessment of creep behaviour of a the die-cast cylinder-head alloy AlSi6Cu4-T6
• 29.05.2006 - Superplasticity of a refractory multiphase Mo-Si-B alloy
• 01.06.2005 - On the Orowan stress in intermetallic ODS alloys and its superposition with grain size and solid solution hardening
• 30.07.2003 - TEM sample preparation using focused ion beam - capabilities and limits
• 01.06.2003 - Barrier/seed Step Coverage Analysis in Via Structures for In-laid Copper Process Control
• 01.05.2002 - Superposition of Grain Size and Dispersion Strengthening in ODS L12-(Al,Cr)3Ti
• 01.05.2001 - Characterization of Layer Stacks in Microelectronic Products: Challenges to Sample Preparation and TEM Analysis
• 01.10.2000 - Application of analytical TEM for failure analysis of semiconductor device structures
• 01.10.1997 - Formation of ODS L12-(Al,Cr)3Ti by mechanical alloying