Skip to main content
Hochschule Landshut Sitepackage
Mechanical and Civil Engineering
Overview

3D printer

There are currently 9 different 3D printers available for different requirements.

Overview
Person steht zum Größenvergleich neben 3D-Großraumdrucker, der die Person überragt

Large-format 3D printer from Builder (NL), type Builder Extrem 2000

  • installation space (X, Y, Z) of 700 x 700 x 1820 mm
  • based on the Fused Filament Fabrication (FFF) process for a wide range of materials, primarily PLA (polylactide)
  • Accuracy: 0.2 - 0.3 mm

3D printer with two extruders from BCN3D, model sigmaX

  • installation space (X, Y, Z) of 420 x 297 x 210 mm
  • based on the Fused Filament Fabrication (FFF) process for a wide range of materials, primarily PLA (polylactide)
  • Accuracy: 0.1 - 0.3 mm

3D printer from Stratasys, model Fortus 250 mc

  • build space (X, Y, Z) of 250 x 250 x 300 mm
  • based on the Fused Filament Fabrication (FFF) process
  • Material: ABS+
  • Accuracy: 0.1 - 0.3 mm

3D printer from Formlabs, type Form 3 Desktop for very fine structures

  • installation space (X, Y, Z) of 145 x 145 x 185 mm
  • based on the stereolithography (LFS or SLA) process for various photopolymer plastics
  • Accuracy: 0.025 - 0.3 mm

The 3D printer based on the Creatr XL from Leapfrog was completely rebuilt and optimised by us.

  • Installation space (X, Y, Z) of 230 x 270 x 600 mm
  • for the production of models made of PLA, PVA, nylon, etc., based on the Fused Filament Fabrication (FFF) process
  • Accuracy: 0.2 - 0.3 mm

3D printer from Sintratec (CH), model Sintratec S1 based on the laser sintering process (SLS)

  • Installation space (X, Y, Z) of 130 x 130 x 180 mm.
  • Material: Polyamide 12
  • Z-resolution 0.1 mm

3D printer from Stratasys, model Objet 30 for very fine structures based on the Multijet Modelling (MJM) process

  • Installation space (X, Y, Z) of 294 x 192 x 148 mm
  • Materials: various photopolymer plastics
  • Accuracy: 0.05 - 0.1 mm

Anisoprint - Composer A3 (FDM system)
3D printer for carbon fibre-reinforced composites

  • build space (X, Y, Z) 420 x 297 x 210 mm
  • two print heads
  • Material: different materials
  • Accuracy: 0.2 - 0.3 mm
  • in operation since 2021

Formlabs Fuse 1 (LS system)

  • Installation space: (X, Y, Z) 165 x 165 x 300 mm
  • Material: Polyamide 12 (nylon)
  • Accuracy: 0.11 mm